Home > Product > NON-CONTACT INFRARED THERMOMETER – PROMPT 3

NON-CONTACT INFRARED THERMOMETER – PROMPT 3

580.000 VNĐ

Prompt 3 non-contact infrared thermometer is Fatzbaby’s new healthcare product with outstanding quality. This product has a durability of up to 5 years of use and is warranted: 1 to 1 within 24 months to help parents feel secure when using it. Using an infrared thermometer is not only convenient, it gives quick results after 1 second, but also eliminates the risk of breakage of dangerous mercury thermometers.

SKU JXB319
Số lượng

1. Features

  • 3 functions: Body temperature mode; Surface temperature mode; Room temperature mode
  • 2 temperature units: °C or °F
  • Measurement range Body temperature mode: 32°C ~ 43°C (89.6°F ~ 109.4°F) Surface temperature mode: 0°C ~ 60°C (32°F ~ 140°F) Room temperature mode: 0°C ~ 40°C (32°F ~ 104°F)
  • High temperature prompt function Under the body temperature mode, if the measured body temperature is higher than or equal to 38°C, the product will be vibrated for three times
  • Allow for a view of the last 32 measurements
  • Energy saving: auto power off after 30 seconds of non-use

2. How to use

  1. Install two batteries
  2. For the first time use after installing batteries, wait 10~15 minutes for the device to warm up and adjust to the room temperature.
  3. Press the On/Scan button, place 0-3 cm (0-1.2in) away from forehead, aim the infrared sensor toward forehead. Make sure the measurement mode is body temperature mode , press the thermometer’s On/Scan button and the temperature will be displayed instantly.
  4. Before taking an individual’s temperature, make sure any hair, dirt or dust is removed from forehead and forehead is dry. Wait 10 minutes after such removal prior to measuring temperature.

3. View previous measurement results 

When the device is on, press “MEM button”, which will then display the last temperature, and allows for a view of the last 32 measurements. In the switch on state, press “MEM” button and hold for 5 seconds, all data in memory will be deleted. Then press “MEM button” again, the display will show “CLr”

4. Changing the batteries

When the battery symbol flashes on the display screen, the batteries need to be changed. To change the batteries, open the lid on the back of the device  and ensure the batteries are positioned in the correct manner. Improperly installing the batteries could cause damage to the device. Do NOT use rechargeable batteries. Only use single-use batteries.

5. Warranty and repair term

The following warranty terms apply:
  • The warranty period for FATZ Thermometer is 24 months from date of purchase. In case of a warranty claim, the date of purchase has to be proven by means of the sales receipt or invoice.
  • Defects in material or workmanship will be removed free of charge within the warranty period.
  • Repairs under warranty do not extend the warranty period either for the unit or for the replacement parts.
  • The following is excluded under the warranty:
  1. All damage which has arisen due to improper treatment, e.g. nonobservance of the user instructions.
  2. All damage which is due to repairs or tampering by the customer or unauthorised third parties.
  3. Damage which has arisen during transport from the manufacturer to the consumer or during transport to the service centre.
  4. Accessories which are subject to normal wear and tear.
  • Liability for direct or indirect consequential losses caused by the unit are excluded even if the damage to the unit is accepted as a warranty claim.